Terms of Use

PLEASE READ CAREFULLY:

Disclaimer of Warranties

You agree that use of the Site is entirely at your own risk. EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THE SITE AND THE MATERIALS ON THE SITE ARE PROVIDED AS IS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. DGIwire does not make any representations or warranties that the Site or materials on the Site or products and services purchased at or through the Site will meet your requirements or expectations, or that the operation of the Site will be uninterrupted, timely, secure or error-free. Some jurisdictions do not allow the exclusion of certain warranties, so some or all of the above exclusions may not apply to you.

Limitation of Liability

You agree that DGIwire and its owners will not be held liable for any improper or incorrect use of the Site or the materials on the Site and assumes no responsibility for any user’s activities on the Site or for the inaccuracy of any content on the Site. In no event will DGIwire nor its owners be liable for any direct, indirect, incidental, special, exemplary or consequential damages, including, without limitation, procurement of substitute goods or services, loss of use, data or profits, or business interruption, arising in any way out of the use of (or inability to use) the Site or the materials on the Site or the inaccuracy of any content on the Site, however caused, under any theory of liability. This disclaimer of liability applies to any damages or injury under any cause of action, including, without limitation, those caused by any failure of performance, error, omission, interruption, deletion, defect, delay in operation or transmission, computer virus or bug, communication line failure, theft, destruction or alteration of or unauthorized access to the Site or materials on the Site. Some jurisdictions do not allow the exclusion of liability for incidental or consequential damages, so some or all of the above exclusions or limitations may not apply to you.

IF YOU ARE DISSATISFIED WITH THE SERVICES OF DGIwire STOP USING IT. DGIwire and its owners disclaim any liability and damages arising out of or relating in any way to the services and or content contained herein.

Disclaimer of Liability for Third Party Content and Links

You agree that DGIwire and its owners are not responsible and will not be held liable for any content on the Site or any third-party content, products or services available on other Web sites accessed through links from the Site. Links to third-party sites are for your convenience only, and their inclusion on the DGIwire Site does not imply any endorsement, guarantee, warranty or representation by DGIwire.

Proprietary Rights

The DGIwire Site and all materials on the Site, including, without limitation, “DGIwire” and all other trademarks and logos on the Site, are protected by copyrights, trademarks, service marks, patents or other proprietary rights and laws. Except as specifically permitted in this Agreement, you may not use the Site or the material on the Site in any manner.

Governing Law and Venue

These Terms of Use shall be governed by and construed in accordance with the laws of the United States and the State of New York. Any dispute arising under or related in any way to these Terms & Conditions shall be adjudicated in a court of competent jurisdiction in the County of New York, NY.

Rights Reserved / Change in Terms

Any rights not expressly granted herein are reserved. DGIwire reserves the right to make changes to these terms and conditions at any time and for any reason by posting a notice on the Site home page. All such changes will become effective 10 days after posting of such notice. Your continued use of the Site after the date such changes become effective will constitute your acceptance of the changes and your agreement to be legally bound by any modifications or amendments to these terms and conditions.

Terms of Syndication:

As long as no changes are made to the press releases and attribution is given to DGIwire in the byline or otherwise, users of DGIwire.com are hereby granted a world-wide, non-exclusive right to freely use our press releases at no cost  for both commercial and non-commercial purposes including reprint, repost and sharing in other publications (including newspapers and magazines), blogs, online bulletin boards, message boards, television and cable programming, newsrooms, chat rooms or any other manner. Further, all links back to the article and Disclaimer page must remain intact.  The photos accompanying each article may or may not be used, but in no case is permission granted for their use without the accompanying press release.

If you would like to explore an extended interview with one of the people or companies mentioned in one of the articles, please contact:  212.825.3210

The free, non-copyrighted original content on this DGIwire website is intended to be informational, not promotional.

DGIwire is a division of Dian Griesel Int’l. (DGI). DGIwire writes and distributes feature articles for client companies, not-for-profit associations, information offices, authors, publishers and individuals. Companies that appear on this website may or may not be clients that are paying for the services of DGI.  DGI may have been compensated in cash or own underlying securities of any of the companies cited within the press releases.  As this site is informational not promotional, nothing contained within this site shall be construed as an endorsement of a company or product nor shall it constitute a recommendation to buy or sell any securities that may be associated with any of the public companies.

Limitation of Liability:

IF YOU ARE DISSATISFIED WITH THE SERVICES OF DGIwire  STOP USING IT. DGIwire disclaims any liability and damages arising out of or relating in any way to the services and or content contained herein.

TERMS & CONDITIONS

  1. Use of the DGIwire website is conditioned upon the acceptance of the Terms and Conditions of Use as set forth below. By using this website, you represent that you have read and understand the Terms and Conditions of Use and that you agree to these Terms and Conditions of Use.
  2. EDITORIAL PRODUCTS FOR PUBLICATION
    1. Editorial products displayed or transmitted on this DGIwire.com website for publication, including DGIwire feature public relatins articles are made available to you individually and free of charge to publish in your newspaper(s), magazine(s) and/or on your websites.
    2. You may alter the design, style and text formatting of any DGIwire Press Release Editorial Products to meet the physical layout and editorial requirements of your publication(s), including any necessary changes to font, column size, etc. Additionally, you may delete certain text or a photograph or illustration within any Press Release Editorial Product.
    3. You may not alter the text or accompanying image of any DGIwire Press Release Editorial Products in such a way that would change its intended meaning.
    4. You may not publish or misuse any DGIwire Media Press Release Editorial Products in any libelous, defamatory, obscene, immoral or fraudulent manner.
    5. You must properly attribute DGIwire Press Release Media Editorial Products. You may not remove the DGIwire Press Release Media attribution (e.g. ‘DGIwire’) within any DGIwire Press Release Media story. You must include the proper attribution designated in the Editorial Product. If desired, you may move this attribution to a different location within a story.
    6. You may not publish or post a DGIwire photo separately from the specific DGIwire article with which it is distributed. If you choose to use a photo from the DGIwire, it must accompany the specific article with which it is distributed and may not be used for any other purposes.
  3. AUTOMATED FEEDS FOR WEBSITES
    1. Automated feeds of stories (Automated Feeds) are made available to you free of charge to publish on your website(s) via signing up for our RSS (real simple syndication feed).
    2. You may also download any select individual stories from DGIwire’s Automated Feeds for publication in print publication(s) or on any website(s).  You may also share or email any article on DGIwire via the social media sharing buttons that appear at the end of each article.
    3. You may alter the design, style and text formatting of any Automated Feed headlines or stories to meet the physical layout and editorial requirements of your website(s), including any necessary changes to font, column size, etc.
    4. You may not alter the text or accompanying image of any Automated Feed headline or story in such a way that would change its intended meaning.
    5. You may not publish or misuse any Automated Feed headline or story in any libelous, defamatory, obscene, immoral or fraudulent manner.
    6. You may not modify the Automated Feed source code for any immoral, illicit or illegal purposes.
    7. You may run DGIwire feeds on as many websites as you wish.
    8. DGIwire reserves the right to modify the presentation of the Automated Feeds at its sole discretion, including but not limited to changing the look, content and/or format of the stories contained therein.
  4. All material (“Materials”) displayed or transmitted on this website, including but not limited to DGIwire Press Release Media Editorial Products, Automated Feeds, photographs and graphics are owned or licensed by DGIwire and are protected by United States copyright, trademarks, service marks, and other proprietary rights, laws and treaties.
  5. Except as provided in this agreement, you may not sell, rent or in any way commercially exploit the Press Release Materials carried on this website, nor may you infringe upon any of the copyrights or other intellectual property rights contained in the Materials.
  6. You acquire no rights or license in the Press Release Materials other than the limited rights to use the website in accordance with these Terms and Conditions of Use. DGIwire reserves any rights not expressly granted under these Terms and Conditions of Use.
  7. Materials may not be used in any print publications or on any websites that DGIwire determines to be unsuitable for any reasons, including but not limited to those that: (i) promote discrimination based on race, sex, religion, nationality, disability, sexual orientation or age; (ii) include pornographic or objectionable content; (ii) violate intellectual property rights.
  8. DGIwire reserves the right to modify, update, suspend, discontinue or restrict the use of or access to this website or any portion of this website, including Automated Feeds, at any time and without notice or liability.
  9. Much but not all of DGIwire’s Editorial Products are financially sponsored by various non-profit and for-profit organizations. DGIwire does not endorse products or services or issue product reviews.
  10. Although all Materials are believed to be reliable, DGIwire makes no representation, neither expressed nor implied, as to the accuracy, completeness, timeliness or reliability of the Materials or any information on this website.
  11. DGIwire expressly disclaims any warranties, expressed or implied. DGIwire’s Press Release Editorial Products and Automated Feeds are provided on an “as-is” basis and shall not be liable to you or anyone else for any loss or damages whatsoever, including but not limited to any direct, indirect, special, consequential, incidental, punitive or other damages, arising out of the use of or inability to use the DGIwire websites, DGIwire Press Release Editorial Products, Automated Feeds or any Materials carried on this website.
  12. You hereby agree to absolutely indemnify, defend and hold harmless DGIwire, its agents, affiliates, subsidiaries, directors, officers, employees, and applicable third parties (e.g., all relevant Partner(s), licensors, licensees, media users, consultants and contractors), against all claims, demands, damages, liabilities, losses, costs, expenses, actions and proceedings of whatsoever nature which may be brought, commenced or prosecuted against DGIwire by reason directly, consequently or indirectly relating to or arising out of your use of or inability to use any DGIwire Press Release Editorial Products, Automated Feeds, or any other DGIwire social media feed on twitter, facebook, linked in or pinterest; and also against all costs (including legal costs on full indemnity basis) and damage which DGIwire may incur arising out of any such claims, actions or proceedings including third-party proceedings.
  13. DGIwire assumes no responsibility for damage to computers or software of the visitor, or any person the visitor subsequently communicates with, from corrupting code or data that is inadvertently passed to the visitor’s computer. Visitor assumes all risk of viruses, worms or other corrupting factors or harm caused by visiting DGIwire’s websites, feeds and third-party links, or by downloading files or content from DGIwire’s websites or feeds. Visitor views and interacts with these services at his or her own risk.
  14. Without limiting the foregoing, neither party shall have any liability for any failure or delay resulting from any condition beyond the reasonable control of such party, including but not limited to governmental action or acts of terrorism, earthquake or other acts of God, labor conditions, and power failures.
  15. DGIwire reserves the right at its discretion to modify the Terms and Conditions of Use under which this website is offered. Use of this website after the posting of any such modification constitutes your agreement to the Terms and Conditions of Use as modified.
  16. This agreement will be governed and construed in accordance with the laws of the State of New York without regard to its conflicts of law provisions. If any provision of this agreement shall be unlawful, void or for any reason unenforceable, then that provision shall be deemed severable from this agreement and shall not affect the validity and enforceability of any remaining provisions.
  17. This constitutes the entire agreement between the parties concerning the Terms and Conditions of Use of this website.

IN CASE YOU MISSED ANY OF THE MESSAGING ABOVE…

TERMS OF SYNDICATION AND USE:

DGIwire is owned by Dian Griesel International.  Contact 212.825.3210 for more information.

As long as no changes are made to the press releases and attribution is given to DGIwire in the byline or otherwise, users of DGIwire.com are hereby granted a world-wide, non-exclusive right to freely use our articles at no cost for both commercial and non-commercial purposes including reprint, repost and sharing in other publications (including newspapers and magazines), blogs, online bulletin boards, message boards, television and cable programming, newsrooms, chat rooms or any other manner. The photos accompanying each article may or may not be used, but in no case is permission granted for their use without the accompanying article.

The free, non-copyrighted original press release content on this DGIwire website is intended to be informational, not promotional.

DGIwire is a division of Dian Griesel Int’l. (DGI). DGIwire writes and distributes press releases for publicly traded and private companies, not-for-profit associations, information offices, authors, publishers and individuals. Companies that appear on this website may or may not be clients of DGI. DGI may have been compensated in cash or own securities in the company mentioned within the press release. As this site is informational not promotional, nothing contained within this site shall be construed as an endorsement of a company or product nor shall it constitute a recommendation to buy or sell any securities that may be associated with any of the public companies.

TERMS & CONDITIONS
Use of the DGIwire website is conditioned upon the acceptance of the Terms and Conditions of Use as set forth below. By using this website, you represent that you have read and understand the Terms and Conditions of Use and that you agree to these Terms and Conditions of Use.

EDITORIAL PRODUCTS FOR PUBLICATION
A -Press Release Editorial products displayed or transmitted on this DGIwire.com website for publication, including DGIwire feature articles are made available to you individually and free of charge to publish in your newspaper(s), magazine(s) and/or on your websites.

B- You may alter the design, style and text formatting of any DGIwire Press Release Editorial Products to meet the physical layout and editorial requirements of your publication(s), including any necessary changes to font, column size, etc. Additionally, you may delete certain text or a photograph or illustration within any Press Release Editorial Product.

C- You may not alter the text or accompanying image of any DGIwire Press Release Editorial Products in such a way that would change its intended meaning.

D- You may not publish or misuse any DGIwire Press Release Media Editorial Products in any libelous, defamatory, obscene, immoral or fraudulent manner.

E- You must properly attribute DGIwire Press Release Media Editorial Products. You may not remove the DGIwire Press Release Media attribution (e.g. ‘DGIwire’) within any DGIwire  Press Release Media story. You must include the proper attribution designated in the Press Release Editorial Product. If desired, you may move this attribution to a different location within a story.

F- You may not publish or post a DGIwire photo separately from the specific DGIwire article with which it is distributed. If you choose to use a photo from the DGIwire, it must accompany the specific article with which it is distributed and may not be used for any other purposes.
AUTOMATED FEEDS FOR WEBSITES
a. Automated feeds of stories (Automated Feeds) are made available to you free of charge to publish on your website(s) via signing up for our RSS (real simple syndication feed).
b. You may also download any select individual stories from DGIwire’s Automated Feeds for publication in print publication(s) or on any website(s). You may also share or email any article on DGIwire via the social media sharing buttons that appear at the end of each article.
c. You may alter the design, style and text formatting of any Automated Feed headlines or stories to meet the physical layout and editorial requirements of your website(s), including any necessary changes to font, column size, etc.
d. You may not alter the text or accompanying image of any Automated Feed headline or story in such a way that would change its intended meaning.
e. You may not publish or misuse any Automated Feed headline or story in any libelous, defamatory, obscene, immoral or fraudulent manner.
f. You may not modify the Automated Feed source code for any immoral, illicit or illegal purposes.
g. You may run DGIwire press release feeds on as many websites as you wish.
h. DGIwire reserves the right to modify the presentation of the Automated Feeds at its sole discretion, including but not limited to changing the look, content and/or format of the stories contained therein.

G- All material (“Materials”) displayed or transmitted on this website, including but not limited to DGIwire Media Editorial Products, Automated Feeds, photographs and graphics are owned or licensed by DGIwire and are protected by United States copyright, trademarks, service marks, and other proprietary rights, laws and treaties.

H- Except as provided in this agreement, you may not sell, rent or in any way commercially exploit the Materials carried on this website, nor may you infringe upon any of the copyrights or other intellectual property rights contained in the Materials.

I- You acquire no rights or license in the Materials other than the limited rights to use the website in accordance with these Terms and Conditions of Use. DGIwire reserves any rights not expressly granted under these Terms and Conditions of Use.

J- Materials may not be used in any print publications or on any websites that DGIwire determines to be unsuitable for any reasons, including but not limited to those that: (i) promote discrimination based on race, sex, religion, nationality, disability, sexual orientation or age; (ii) include pornographic or objectionable content; (ii) violate intellectual property rights.

K- DGIwire reserves the right to modify, update, suspend, discontinue or restrict the use of or access to this website or any portion of this website, including Automated Feeds, at any time and without notice or liability.

L- Much but not all of DGIwire’s Press Release Editorial Products are financially sponsored by various non-profit and for-profit organizations. DGIwire does not endorse products or services or issue product reviews.

M- Although all Materials are believed to be reliable, DGIwire makes no representation, neither expressed nor implied, as to the accuracy, completeness, timeliness or reliability of the Materials or any information on this website.

N- DGIwire expressly disclaims any warranties, expressed or implied. DGIwire’s Press Release Editorial Products and Automated Feeds are provided on an “as-is” basis and shall not be liable to you or anyone else for any loss or damages whatsoever, including but not limited to any direct, indirect, special, consequential, incidental, punitive or other damages, arising out of the use of or inability to use the DGIwire websites, DGIwire Press Release Editorial Products, Automated Feeds or any Materials carried on this website.

O- You hereby agree to absolutely indemnify, defend and hold harmless DGIwire, its agents, affiliates, subsidiaries, directors, officers, employees, and applicable third parties (e.g., all relevant Partner(s), licensors, licensees, media users, consultants and contractors), against all claims, demands, damages, liabilities, losses, costs, expenses, actions and proceedings of whatsoever nature which may be brought, commenced or prosecuted against DGIwire by reason directly, consequently or indirectly relating to or arising out of your use of or inability to use any DGIwire Press Release Editorial Products, Automated Feeds, or any other DGIwire social media feed on twitter, facebook, linked in or pinterest; and also against all costs (including legal costs on full indemnity basis) and damage which DGIwire may incur arising out of any such claims, actions or proceedings including third-party proceedings.

P- DGIwire assumes no responsibility for damage to computers or software of the visitor, or any person the visitor subsequently communicates with, from corrupting code or data that is inadvertently passed to the visitor’s computer. Visitor assumes all risk of viruses, worms or other corrupting factors or harm caused by visiting DGIwire’s websites, feeds and third-party links, or by downloading files or content from DGIwire’s websites or feeds. Visitor views and interacts with these services at his or her own risk.

Q- Without limiting the foregoing, neither party shall have any liability for any failure or delay resulting from any condition beyond the reasonable control of such party, including but not limited to governmental action or acts of terrorism, earthquake or other acts of God, labor conditions, and power failures.

R- DGIwire reserves the right at its discretion to modify the Terms and Conditions of Use under which this website is offered. Use of this website after the posting of any such modification constitutes your agreement to the Terms and Conditions of Use as modified.

S- This agreement will be governed and construed in accordance with the laws of the State of New York without regard to its conflicts of law provisions. If any provision of this agreement shall be unlawful, void or for any reason unenforceable, then that provision shall be deemed severable from this agreement and shall not affect the validity and enforceability of any remaining provisions.

T- This constitutes the entire agreement between the parties concerning the Terms and Conditions of Use of this website.

Facebook Iconfacebook like buttonTwitter Icontwitter follow button